ACRYL-GLO
ACRYL-GLO acrylic enamel paints provide a durable finish that is easy to apply and suitable for both commercial vehicle and passenger car work. ACRYL-GLO acrylic enamels have excellent adhesion over virtually any original equipment (OEM) type finish with the proper preparation and are made to withstand the wear of commercial vehicles. ACRYL-GLO will give any vehicle a “right off the production line” look. Kirker’s acrylic enamels are available in 45 pre-mixed factory-packaged colors, chosen according to production trends and popularity over the past decade.

Mix one gallon of ACRYL-GLO acrylic enamel to one quart of appropriate ACRYL-GLO acrylic enamel reducer, depending on the temperature (4:1). For temperatures below 70°F use R-7910, use R-7911 for temperatures from 70 to 85°F, and R-7912 for temperatures above 85°F. After reducing these acrylic enamels, a urethane hardener may be used to decrease cure time while increasing gloss and durability. One pint of urethane hardener should be mixed with one gallon of sprayable ACRYL-GLO acrylic enamel (8:1).

The appropriate Kirker hardeners are K-1607 Wet Look Acrylic Enamel Urethane Hardener and K-1606 Super Wet Look Acrylic Enamel Urethane Hardener.