SYN-GLO
SYN-GLO synthetic enamel paints are available in 18 pre-mixed factory-packaged colors, selected on the basis of popularity from year to year. Kirker’s synthetic enamels are easy to apply, designed to withstand the everyday wear on commercial vehicles and provide an economical finish.

Long lasting color and gloss retention, plus high build combine to make this a fine line of durable synthetic finishes. Kirker’s SYN-GLO enamels can be used to repaint baked-on factory finished vehicles with proper preparation.

Mix one gallon of SYN-GLO enamel to one quart of the appropriate SYN-GLO enamel reducer, depending upon temperature and humidity (4:1). Use R-8250 below 65°F, R-8253 when between 65°F and 90°F, or R-8256 above 90°F. Mix one pint of K-1605 synthetic enamel urethane hardener to increase gloss and durability while decreasing cure time. With traditional-style guns, SYN-GLO should be sprayed 40 - 60 PSI. Adjustments may need to be made when using different style guns.

Apply a non-metallic SYN-GLO color with a mist coat. After allowing it to get tacky, follow up with a full wet coat. On a metallic color, the process should be reversed: One full wet coat, followed by a mist coat once the first coat has become tacky. At 68° F, SYN-GLO should be set to touch within 1 hour, and dry within four hours.

See product Technical Data Sheet for more detailed information. (PDF)

Color Chart (PDF)