BLACK DIAMOND Low-VOC Urethane Reducer

Made from different blends of high-quality exempt solvents, these urethane-grade reducers aid flow and help deliver a beautiful finish in any of the BLACK DIAMOND Series Low-VOC systems. Two speeds for spot or overall repair work, maximizing control over conditions. Because of the exempt contents, these reducers are also a great choice in place of conventional solvents in other coatings systems to help maintain VOC compliance. Packaged in quarts only. 

​

LVR-575     Medium (Spot/Panel Repair)
LVR-585     Slow (Panel/Overall Repair)

​​

​

​

​

ULTRA-GLO Urethane-Grade Reducer
A premium-quality alcohol- and water-free urethane reducer, this series is designed to be used with Kirker's ULTRA-GLO single-stage urethane paints, SPECTRA Series urethane candy color system and even the BLACK DIAMOND Series Low-VOC basecoat (in areas where VOC limits allow). May also be used to cut viscosity and aid in flow in 2K urethane primers, epoxy primers, Super Rust Stop non-sanding primers and any of Kirker's urethane clearcoats. Packaged in both gallons and quarts.

 

UR-8065     Fast (For use below 70°F)     Quart
UR-9065     Fast (For use below 70°F)     Gallon
UR-8075     Medium (For use between 70-80°F)     Quart

UR-9075     Medium (For use between 70-80°F)     Gallon

UR-8085     Slow (For use between 80-90°F)     Quart
UR-9085     Slow (For use between 80-90°F)     Gallon

​

​​

​

​

ACRYL-GLO Acrylic Enamel Reducer
Designed for use with the ACRYL-GLO acrylic enamel topcoat color system, these reducers are also used with SUPER RUST STOP non-sanding primers when topcoating with ACRYL-GLO. Available in three speeds. Packaged in gallons only.

​

R-7910     Fast (For use below 70°F)     Gallon
R-7911     Medium (For use between 70-80°F)     Gallon

R-7912     Slow (For use above 80°F)     Gallon

​

​​

​

​

SYN-GLO Synthetic Enamel Reducer

Kirker's fast-drying Synthetic Enamel Reducer is designed specifically for use in the SYN-GLO topcoat color system. Also used in SUPER RUST STOP non-sanding primers when topcoating with synthetic enamel. Packaged in gallons only. 

​

R-8253     Medium (For use between 70-80°F)     Gallon

​

​​

​

​

Low-VOC Lacquer Thinner

This premium-quality Low-VOC Lacquer Thinner is designed for use in Kirker's High-Build Acrylic Lacquer Primer Surfacers and is also widely used as a clean-up item. Packaged in gallons only.

​

R-300    Medium     Gallon​​​​